参考:
http://redis.io/topics/cluster-tutorial(主要是Creating a Redis Cluster using the create-cluster script部分)
https://ruby.taobao.org/
安装一款不熟悉的软件前先看INSTALL,README,这是习惯,生产上要建立普通用户并调节适当参数,下面是以root身份安装运行.
下载解压并安装redis
make test提示需要更高版本的tcl,跳到安装过程可能遇到的问题
wget http://download.redis.io/releases/redis-3.0.7.tar.gz tar xf redis-3.0.7.tar.gz cd redis-3.0.7 mkdir -p /opt/redis make test make PREFIX=/opt/redis install
复制两个脚本到安装的目录
cp ~/redis-3.0.7/src/redis-trib.rb /opt/redis/ cp ~/redis-3.0.7/utils/create-cluster/create-cluster /opt/redis/1212
根据实际修改/opt/redis/create-cluster.改动的地方有几处
a.增加了三个变量BASEDIR,BINDIR和DATADIR,
b.修改相关命令路径,
c.start前,先进入DATADIR,start后,返回原目录
d.clean前,先进入DATADIR,start后,返回原目录
e.create的host由127.0.0.1改为192.168.1.194(不改有时会报Too many Cluster redirections)
下面是修改后的shell
#!/bin/bash
# Settings
PORT=30000
TIMEOUT=2000
NODES=6
REPLICAS=1
BASEDIR=/opt/redis
BINDIR=$BASEDIR/bin
DATADIR=$BASEDIR/data
# You may want to put the above config parameters into config.sh in order to
# override the defaults without modifying this script.
if [ -a config.sh ]
then
source "config.sh"
fi
# Computed vars
ENDPORT=$((PORT+NODES))
if [ "$1" == "start" ]
then
cd $DATADIR
while [ $((PORT < ENDPORT)) != "0" ]; do
PORT=$((PORT+1))
echo "Starting $PORT"
$BINDIR/redis-server --port $PORT --cluster-enabled yes --cluster-config-file nodes-${PORT}.conf --cluster-node-timeout $TIMEOUT --appendonly yes --appendfilename appendonly-${PORT}.aof --dbfilename dump-${PORT}.rdb --logfile ${PORT}.log --daemonize yes
done
cd -
exit 0
fi
if [ "$1" == "create" ]
then
HOSTS=""
while [ $((PORT < ENDPORT)) != "0" ]; do
PORT=$((PORT+1))
HOSTS="$HOSTS 192.168.1.194:$PORT"
done
$BASEDIR/redis-trib.rb create --replicas $REPLICAS $HOSTS
exit 0
fi
if [ "$1" == "stop" ]
then
while [ $((PORT < ENDPORT)) != "0" ]; do
PORT=$((PORT+1))
echo "Stopping $PORT"
$BINDIR/redis-cli -p $PORT shutdown nosave
done
exit 0
fi
if [ "$1" == "watch" ]
then
PORT=$((PORT+1))
while [ 1 ]; do
clear
date
$BINDIR/redis-cli -p $PORT cluster nodes | head -30
sleep 1
done
exit 0
fi
if [ "$1" == "tail" ]
then
INSTANCE=$2
PORT=$((PORT+INSTANCE))
tail -f ${PORT}.log
exit 0
fi
if [ "$1" == "call" ]
then
while [ $((PORT < ENDPORT)) != "0" ]; do
PORT=$((PORT+1))
$BINDIR/redis-cli -p $PORT $2 $3 $4 $5 $6 $7 $8 $9
done
exit 0
fi
if [ "$1" == "clean" ]
then
cd $DATADIR
rm -rf *.log
rm -rf appendonly*.aof
rm -rf dump*.rdb
rm -rf nodes*.conf
cd -
exit 0
fi
echo "Usage: $0 [start|create|stop|watch|tail|clean]"
echo "start -- Launch Redis Cluster instances."
echo "create -- Create a cluster using redis-trib create."
echo "stop -- Stop Redis Cluster instances."
echo "watch -- Show CLUSTER NODES output (first 30 lines) of first node."
echo "tail -- Run tail -f of instance at base port + ID."
echo "clean -- Remove all instances data, logs, configs."123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102
不要忘了创建数据目录mkdir -p /opt/redis/data
根据上面的参考,启动集群和停止集群
启动集群:先敲入/opt/redis/create-cluster start回车,再敲入/opt/redis/create-cluster create回车,再输入yes回车
停止集群:敲入/opt/redis/create-cluster stop回车
如果以前启动过,造成不一致数据,create时就会报错,可先/opt/redis/create-cluster clean
测试
<dependency> <groupId>redis.clients</groupId> <artifactId>jedis</artifactId> <version>2.8.1</version> </dependency>
声明JedisCluster Bean
@Bean
public JedisCluster jedisCluster(){
Set<HostAndPort> nodes=new HashSet<>(3);
nodes.add(new HostAndPort("192.168.1.194",30001));
nodes.add(new HostAndPort("192.168.1.194",30002));
nodes.add(new HostAndPort("192.168.1.194",30003));
return new JedisCluster(nodes,2000,5);
}
测试set和get
AnnotationConfigApplicationContext context= new AnnotationConfigApplicationContext(AppConfig.class);
JedisCluster jedisCluster = (JedisCluster) context.getBean("jedisCluster");
jedisCluster.set("xxx","123");
System.out.println("jedisCluster.get = " + jedisCluster.get("xxx"));
安装过程可能遇到的问题:
make test时,提醒You need tcl 8.5 or newer in order to run the Redis test.到http://www.tcl.tk/software/tcltk/download.html下载Tcl,
wget http://prdownloads.sourceforge.net/tcl/tcl8.5.19-src.tar.gz tar xf tcl8.5.19-src.tar.gz cd tcl8.5.19/unix ./configure make make test make install
因为create-cluster create会调用redis-trib.rb,它是一个ruby脚本,所以提示没有安装ruby,就先安装yum install -y ruby
如果提示加载rubygems错误,使用以下办法安装rubygems
a.https://rubygems.org/pages/download下载tgz格式的安装包(wget可能不通,在windows用旋风或迅雷下载)
b.mount -t cifs -o username=xiejx618,password=123456 //192.168.1.115/share /share
cp /share/rubygems-2.6.4.tgz ./ tar xf rubygems-2.6.4.tgz cd rubygems-2.6.4 ruby setup.rb
如果再提示no such file to load – rdoc/rdoc,就先安装yum install -y rdoc
如果再提示 no such file to load – redis,就使用gem install redis -v 3.0.7
gem又是因为墙原因无法使用默认源,就修改为淘宝源
可能用到的几个命令
帮助:gem sources --help
查看源:gem sources -l
删除源:gem sources -r https://rubygems.org/
添加源:gem sources -a https://ruby.taobao.org/
更新源缓存:gem sources -u
redis,redhat6.4
免责声明：本站文章均来自网站采集或用户投稿，网站不提供任何软件下载或自行开发的软件！ 如有用户或公司发现本站内容信息存在侵权行为，请邮件告知！ 858582#qq.com
《魔兽世界》大逃杀！60人新游玩模式《强袭风暴》3月21日上线
暴雪近日发布了《魔兽世界》10.2.6 更新内容，新游玩模式《强袭风暴》即将于3月21 日在亚服上线，届时玩家将前往阿拉希高地展开一场 60 人大逃杀对战。
艾泽拉斯的冒险者已经征服了艾泽拉斯的大地及遥远的彼岸。他们在对抗世界上最致命的敌人时展现出过人的手腕，并且成功阻止终结宇宙等级的威胁。当他们在为即将于《魔兽世界》资料片《地心之战》中来袭的萨拉塔斯势力做战斗准备时，他们还需要在熟悉的阿拉希高地面对一个全新的敌人──那就是彼此。在《巨龙崛起》10.2.6 更新的《强袭风暴》中，玩家将会进入一个全新的海盗主题大逃杀式限时活动，其中包含极高的风险和史诗级的奖励。
《强袭风暴》不是普通的战场，作为一个独立于主游戏之外的活动，玩家可以用大逃杀的风格来体验《魔兽世界》，不分职业、不分装备（除了你在赛局中捡到的），光是技巧和战略的强弱之分就能决定出谁才是能坚持到最后的赢家。本次活动将会开放单人和双人模式，玩家在加入海盗主题的预赛大厅区域前，可以从强袭风暴角色画面新增好友。游玩游戏将可以累计名望轨迹，《巨龙崛起》和《魔兽世界：巫妖王之怒 经典版》的玩家都可以获得奖励。